Rent-A-Mason (R-A-M) Program
Want to do it yourself & save $$$ and yet still want a professional look?
Spend a few hours with a mason on your work site and receive professional instruction.
For more details come on in and ask about our Rent-A-Mason program.
- Stone
- Lathe
- Nails (Roofing 1½” with Hammer) or Air Staples & Compressor
- 2 Pails (5 Gallon)
- Mud Board (Piece of Wood 2’ x 2’ approx.)
- Wheelbarrow with Hoe
- Small Paint Brush
- Small Trowel (Pie shaped)
- Masonry Cement
- Masonry Sand
- Round Shovel
- Skill Saw & either a few Abrasive Blades or a Diamond Blade
- Cleaning Sponge & Clean Rags
- Carpenter Pencil.
If project is Outdoors then Tyvek or Tar Paper will be required as well as a Cutting Knife & Hammer Stapler with Staples
If project is Indoors and on finished flooring you will require some Tarps to protect the floor. Hardwood floors might require Plywood Sheets laid over the Tarps.
If the project consists of Flagstones then a small 1’ - 2’ Angle Iron will be required to assist stone shaping.